Dongguan International Technology Transfer Center, 124 Dongbao Road, Dongcheng District, Dongguan, China
Request a quote
Barrel Blankets — Removable Insulation
Barrel Blankets

Barrel Blankets — Removable Insulation

Removable barrel insulation blankets for injection molding machines, rated 200 C continuous, hook-and-loop closure, typically cutting barrel heating...

Sourced to the machine you actually run

Give us the machine model, tonnage or the space it has to fit. We confirm the exact unit, controls and options before quoting.

Quoted to confirmed specs

Engineering review Monday to Saturday. Send the machine model and the output you need — the reply carries price, scope and delivery.

Email engineering

Not sure which size fits? Send the machine model or a photo of the existing unit and we will match it.

Details

Specification & application

A barrel blanket is the fastest energy project available to any injection molder. The heating bands on an unprotected barrel radiate heat into the shop; an insulated jacket keeps it in the steel, shortens heat-up time and stabilises zone temperature.

Construction

PropertyValue
Outer shellSilicone coated fiberglass cloth, oil and coolant resistant
InsulationNeedle-punched fiberglass, 10 - 25 mm
Continuous service temperature200 °C (392 °F), short excursion to 230 °C
ClosureHook-and-loop, with draw cord on long sections
FastenersBrass grommets, spring hooks, optional stainless buckles
Cut-outsMade to clear heater terminals, thermocouples and nozzle access

What it saves

Measured savings depend on barrel size, set temperature and shop draughts, but 30 - 50% of barrel heating energy is the usual band, with payback inside a few months on a machine running three shifts. Two secondary effects matter just as much: zone temperatures hold tighter because the controller is no longer fighting radiant loss, and the shop floor gets noticeably cooler around the machine.

Ordering

Blankets are made to the barrel profile, not to the machine model, because barrel geometry changes with screw diameter and OEM. Send a sketch with the heated length, the outside diameter of each zone, and the position of heater terminals. We mark each blanket with the zone number so installation is unambiguous.

For related barrel hardware see mica barrel heater bands and barrels for injection molding.

Related

Other components in this range

View category

Need this part matched to your press?

Send the machine model and the resin. We confirm geometry, material and surface treatment before quoting.

Barrel Blankets — Removable Insulation Quoted to confirmed specs