Ceramic Heater Bands for High-Temperature Zones
Ceramic insulated heater bands rated to 650 C with watt densities up to 7 W/cm2, for engineering resins, glass-filled compounds and high temperature nozzles.
View details
Ceramic insulated heater bands rated to 650 C with watt densities up to 7 W/cm2, for engineering resins, glass-filled compounds and high temperature nozzles.
Give us the machine model, tonnage or the space it has to fit. We confirm the exact unit, controls and options before quoting.
Engineering review Monday to Saturday. Send the machine model and the output you need — the reply carries price, scope and delivery.
Not sure which size fits? Send the machine model or a photo of the existing unit and we will match it.
Ceramic heater bands replace the mica core with interlocking ceramic segments that hold the resistance wire in a grooved channel. The result is a heater that runs hotter, recovers faster and does not absorb moisture — the three failure modes that send mica bands back for replacement.
| Parameter | Typical range |
|---|---|
| Inside diameter | 30 mm - 300 mm |
| Band width | 30 mm - 120 mm |
| Maximum sheath temperature | 600 - 650 °C (1110 - 1200 °F) |
| Watt density | up to 7 W/cm² |
| Sheath material | 304 or 321 stainless steel, aluminized option |
| Insulation | Ceramic segments, moisture resistant |
| Termination | Ceramic terminal block, screw or lead wire |
Clamp evenly and check the gap all the way round; a ceramic band that only touches on one side will fail there. Do not overtighten — the segments are brittle. Use the supplied clamping screw and torque it by hand, then re-check after the first heat cycle. Keep resin drool off the ceramic surface, and never wrap a failed band in aluminum foil as a temporary fix; it changes the heat balance and usually takes the thermocouple with it.
For lower temperature work where budget matters more than headroom, see mica nozzle band heaters.
Ceramic insulated heater bands rated to 650 C with watt densities up to 7 W/cm2, for engineering resins, glass-filled compounds and high temperature nozzles.
View detailsSend the machine model and the resin. We confirm geometry, material and surface treatment before quoting.
Have a drawing? Reply to our confirmation email with the file attached — PDF, STEP, DXF or a photo of the part all work.
Our engineering team answers during working hours, Monday to Saturday. For urgent orders, call +8613751260808.