Injection Molding Machine Selection Guide
How to specify an injection molding machine: clamp tonnage, shot size, tie bar spacing, platen size and screw diameter, with worked selection rules.
View details
How to specify an injection molding machine: clamp tonnage, shot size, tie bar spacing, platen size and screw diameter, with worked selection rules.
Give us the machine model, tonnage or the space it has to fit. We confirm the exact unit, controls and options before quoting.
Engineering review Monday to Saturday. Send the machine model and the output you need — the reply carries price, scope and delivery.
Not sure which size fits? Send the machine model or a photo of the existing unit and we will match it.
Machine selection goes wrong in one of two directions: buying clamp tonnage that is never used, or buying a machine whose tie bar spacing will not accept next year's mold. Both are avoidable with four numbers.
| Parameter | Rule of thumb |
|---|---|
| Clamp tonnage | Projected area (cm²) x cavity pressure (kg/cm²) / 1000, plus 10 - 20% margin |
| Shot size | Part + runner weight should sit at 25 - 70% of rated shot capacity |
| Tie bar spacing | Mold width + 50 mm minimum clearance |
| Daylight and stroke | Mold height + part depth + 30 mm for take-out |
Toggle machines are fast and energy efficient for high-volume, single-mold work. Two-platen machines give a smaller footprint and easier mold access on large tonnage. Hydraulic machines remain common where core pulls and complex sequences dominate. Servo hydraulic and all-electric drives reduce energy per shot substantially, and on a three-shift operation that difference usually pays back the price premium within two to three years.
The machine is only half the cell. Budget for a dryer, chiller and granulator, a conveyor, and the screw and barrel that suits the resin.
How to specify an injection molding machine: clamp tonnage, shot size, tie bar spacing, platen size and screw diameter, with worked selection rules.
View detailsSend the machine model and the resin. We confirm geometry, material and surface treatment before quoting.
Have a drawing? Reply to our confirmation email with the file attached — PDF, STEP, DXF or a photo of the part all work.
Our engineering team answers during working hours, Monday to Saturday. For urgent orders, call +8613751260808.