Purging Compounds for Color and Resin Changes
Mechanical and chemical purging compounds for color changes, resin changes and carbon removal, in 25 kg bags and ready-to-use forms.
View details
Mechanical and chemical purging compounds for color changes, resin changes and carbon removal, in 25 kg bags and ready-to-use forms.
Give us the machine model, tonnage or the space it has to fit. We confirm the exact unit, controls and options before quoting.
Engineering review Monday to Saturday. Send the machine model and the output you need — the reply carries price, scope and delivery.
Not sure which size fits? Send the machine model or a photo of the existing unit and we will match it.
A purging compound pays for itself the first time it saves a barrel teardown. Mechanical grades carry carbon and color out on a carrier resin; chemical grades soften hard deposits so they can be pushed out with the next shot.
| Type | Best for | Typical use |
|---|---|---|
| Mechanical, PP based | Color and resin changes | 1 - 2 % of barrel capacity, repeat until clean |
| Mechanical, HDPE based | General purging, low temperature | Same, at 200 - 240 °C |
| Chemical, foaming | Carbon and burnt deposits | Soak 5 - 15 min, then purge out |
| Chemical, non-foaming | Hot runners and small shot sizes | Low residue, good for valve gates |
| Glass-filled compatible | Abrasive resins | Gentle on screw and barrel |
Purge at the normal processing temperature of the resin you are removing, not at the temperature of the resin going in. Run the screw at low back pressure, allow the compound to dwell, then purge with full stroke several times. Stop when the purge slug comes out uniform in color. If the machine has a hot runner, purge each drop individually with the tip temperature raised 10 - 20 °C.
Do not leave chemical purging compound sitting in the barrel overnight; it can attack the nitrided layer. Follow with a neutralising run of the production resin.
Mechanical and chemical purging compounds for color changes, resin changes and carbon removal, in 25 kg bags and ready-to-use forms.
View detailsSend the machine model and the resin. We confirm geometry, material and surface treatment before quoting.
Have a drawing? Reply to our confirmation email with the file attached — PDF, STEP, DXF or a photo of the part all work.
Our engineering team answers during working hours, Monday to Saturday. For urgent orders, call +8613751260808.