Seal Ring - Keeping Melt Out of the Drive End
Limits leakage past the tip; matched to the wear profile of the assembly.
View details
Screw tip assemblies for injection units: tips, non-return rings, seats and seal rings, matched to the screw end and the resin.
Machined to your barrel dimensions and screw geometry — no catalogue constraints. Single replacement part or production batch.
Engineering review Monday to Saturday. Send the machine model, screw diameter and resin — the reply carries price, material grade and lead time.
No drawing on file? Send a photo of the worn part and the machine model — we work the geometry back and confirm it with you before machining.
The screw tip is a small part with a large job: it has to seal against back-flow during injection, then open cleanly during recovery. When it stops sealing, the symptom is a cushion that will not hold and parts that vary in weight from shot to shot.
Tips are matched to the screw end and to the resin. A free-flow tip is fine for a commodity grade and wrong for a low-viscosity engineering resin that will run past it.
| Type | How it seals | Use it for |
|---|---|---|
| Free-flow | No check element; relies on melt viscosity and screw geometry | Commodity PE, PP, PS where a small back-flow is tolerable |
| Non-return ring | A sliding ring seats against a shoulder on the forward stroke | The general-purpose choice for engineering resins; simple and repairable |
| Ball check | A ball seats in a conical seat | Low-viscosity resins that would slip past a ring; needs a clean melt |
| Sliding ring, heavy duty | Ring with a hardened seat and a longer guide | Filled and abrasive compounds, high back-pressure settings |
Tip dimensions are matched to the screw end you send or draw. The type selection above is the starting point for that conversation, not a stock list.
Limits leakage past the tip; matched to the wear profile of the assembly.
View details
Screw tip assemblies for injection units: tips, non-return rings, seats and seal rings, matched to the screw end and the resin.
View details
Closes the flow path during injection; matched to its seat rather than simply hardened.
View detailsSend the machine model and the resin. We confirm geometry, material and surface treatment before quoting.
Have a drawing? Reply to our confirmation email with the file attached — PDF, STEP, DXF or a photo of the part all work.
Our engineering team answers during working hours, Monday to Saturday. For urgent orders, call +8613751260808.