Dongguan International Technology Transfer Center, 124 Dongbao Road, Dongcheng District, Dongguan, China
Request a quote
Vented Barrel for Hygroscopic Resins
Barrels for Injection Molding

Vented Barrel for Hygroscopic Resins

Vent port and decompression zone for hygroscopic and recycled material.

Made to your drawing, sample or part number

Machined to your barrel dimensions and screw geometry — no catalogue constraints. Single replacement part or production batch.

Quoted to confirmed specs

Engineering review Monday to Saturday. Send the machine model, screw diameter and resin — the reply carries price, material grade and lead time.

Email engineering

No drawing on file? Send a photo of the worn part and the machine model — we work the geometry back and confirm it with you before machining.

Details

Specification & application

A vented barrel lets moisture and volatiles escape before the melt reaches the nozzle. It is built as two stages: the first plasticizes and pressurises, a decompression zone drops the pressure to atmospheric under the vent port, and the second stage meters the melt to the front.

Construction data

ParameterTypical rangeNote
StagesTwo, with a decompression zone between themThe screw must match; a single-stage screw cannot be used
Vent port positionAt the decompression zone, set by the screw designPosition is fixed by the screw geometry, not adjustable
Vent port sizeLarge enough to pass volatiles without blockingScreen or baffle fitted to stop melt escape
First stage L/DRoughly half the total lengthHas to melt and pump against the decompression
Second stage L/DThe remainder, ending in the metering sectionSets final melt quality and pressure stability

When it is the right answer

  • Hygroscopic resins — PA, PC, PET — where a drier cannot get moisture low enough.
  • High regrind percentages, which carry volatiles from previous processing.
  • Materials that release decomposition products at processing temperature.
  • Situations where a vacuum drier is not available or not practical.

What it does not fix

  • Wet resin with free surface water. A vent removes vapour from the melt, it does not dry pellets.
  • Venting cannot compensate for a worn screw. If the first stage cannot build pressure, the decompression zone will not work as designed.
  • A blocked vent screen looks like a processing problem — pressure rises, output falls. Check the vent before changing any setpoints.

Vented barrels are always supplied as a matched barrel and screw pair. Send the machine model and the resin, and we will lay out both stages together.

Related

Other components in this range

View category

Need this part matched to your press?

Send the machine model and the resin. We confirm geometry, material and surface treatment before quoting.

Vented Barrel for Hygroscopic Resins Quoted to confirmed specs