Dongguan International Technology Transfer Center, 124 Dongbao Road, Dongcheng District, Dongguan, China
Request a quote
Nozzle Body — Threaded Body and Seat Machining
Nozzle Bodies and Tips

Nozzle Body — Threaded Body and Seat Machining

Final section of the melt path, carrying the heater band up to the sprue.

Made to your drawing, sample or part number

Machined to your barrel dimensions and screw geometry — no catalogue constraints. Single replacement part or production batch.

Quoted to confirmed specs

Engineering review Monday to Saturday. Send the machine model, screw diameter and resin — the reply carries price, material grade and lead time.

Email engineering

No drawing on file? Send a photo of the worn part and the machine model — we work the geometry back and confirm it with you before machining.

Details

Specification & application

The nozzle body is the heated section that carries melt from the barrel end to the tip. Its length is set by the physical gap between the barrel and the mold, and its heater is set by how long the melt has to sit inside it.

Data

ParameterTypical rangeConfirmed at order
Body lengthSet by the barrel-to-mold gapTaken from your drawing or the existing part
Thread formMetric or imperial, matched to the barrel endNot interchangeable even at similar diameters
HeaterBand or coil, sized to the body lengthWattage and voltage agreed with the body
ThermocoupleType J or K, positioned at the melt channelDepth set so the bead reads melt, not the body
Internal channelBored straight through, polishedDiameter matched to the orifice and flow rate

Sizing

  • A long body needs more heater wattage, but too much wattage on a short body will cook the melt at the wall while the center stays cold.
  • The thermocouple has to reach the melt channel. A bead sitting in the body wall reads the metal, and the controller will chase a temperature the polymer never sees.
  • Where the body is long enough to sag, support it. A nozzle body hanging unsupported will bend and then leak at the seat.

What we need to quote

  • Barrel end drawing, or the existing nozzle body for measurement.
  • The gap between the barrel face and the mold when the machine is at injection position.
  • Heater voltage and the thermocouple type already on the machine.
Related

Other components in this range

View category

Need this part matched to your press?

Send the machine model and the resin. We confirm geometry, material and surface treatment before quoting.

Nozzle Body — Threaded Body and Seat Machining Quoted to confirmed specs