Dongguan International Technology Transfer Center, 124 Dongbao Road, Dongcheng District, Dongguan, China
Request a quote
Nozzle Tips — Matched to Resin and Gate
Nozzle Bodies and Tips

Nozzle Tips — Matched to Resin and Gate

Sets the orifice that decides shear, drool and stringing at the gate.

Made to your drawing, sample or part number

Machined to your barrel dimensions and screw geometry — no catalogue constraints. Single replacement part or production batch.

Quoted to confirmed specs

Engineering review Monday to Saturday. Send the machine model, screw diameter and resin — the reply carries price, material grade and lead time.

Email engineering

No drawing on file? Send a photo of the worn part and the machine model — we work the geometry back and confirm it with you before machining.

Details

Specification & application

The tip decides how the melt leaves the machine. Orifice size sets fill rate and shear; the seat radius sets how cleanly the tip breaks away from the sprue bushing.

Types

TypeSeals byUse it for
Open / straight throughNothing — free flowCommodity resins, short cycles, drool is acceptable
Spring shut-offSpring closes the needle when injection pressure dropsLow viscosity resins, engineering grades
Needle shut-off, actuatedExternal actuator opens and closes positivelyLarge orifices, high flow, no drool permitted

Data

ParameterTypical rangeNote
Orifice diameterChosen against fill rate and filler sizeMust clear the filler or the seat erodes
Seat radiusMatched exactly to the sprue bush radiusA mismatch leaves a ring of flash at the gate
Land lengthShort land breaks cleaner, long land controls shearSet with the resin in mind
Tip materialHardened tool steel or beryllium copperBeryllium copper for heat transfer, steel for wear

Common mistakes

  • An orifice sized for the machine rather than the part. Too large and the gate does not shear cleanly; too small and the tip freezes between shots.
  • Mismatched seat radius. This is the single most common cause of gate flash on a new nozzle.
  • A shut-off tip fitted to a resin that does not need one, adding a failure point for no benefit.
Related

Other components in this range

View category

Need this part matched to your press?

Send the machine model and the resin. We confirm geometry, material and surface treatment before quoting.

Nozzle Tips — Matched to Resin and Gate Quoted to confirmed specs