Dongguan International Technology Transfer Center, 124 Dongbao Road, Dongcheng District, Dongguan, China
Request a quote
Nozzle Extensions for Deep Molds
Nozzle Bodies and Tips

Nozzle Extensions for Deep Molds

Reaches the sprue when the standard nozzle cannot; heated or unheated.

Made to your drawing, sample or part number

Machined to your barrel dimensions and screw geometry — no catalogue constraints. Single replacement part or production batch.

Quoted to confirmed specs

Engineering review Monday to Saturday. Send the machine model, screw diameter and resin — the reply carries price, material grade and lead time.

Email engineering

No drawing on file? Send a photo of the worn part and the machine model — we work the geometry back and confirm it with you before machining.

Details

Specification & application

An extension adds length between the nozzle body and the tip. It is the part you fit when the barrel cannot reach the sprue bushing, or when a deep mold needs the melt delivered further forward.

Data

ParameterTypical rangeNote
LengthFrom a few millimeters to several hundredSet by the measured gap, not estimated
HeaterUsually required above about 60 mmAn unheated extension acts as a cold slug trap
Internal boreMatched to the body bore, no stepA step creates a dead zone that degrades resin
Thread and seatSame forms as the body it screws intoConfirmed against the body drawing
StraightnessCritical on long extensionsRunout shows up as seat leakage

Design points

  • Keep the bore continuous. Any change in diameter traps resin that will degrade and then release black specks into a part.
  • Heat the extension. A cold extension is a cold slug generator, and the symptom is short shots that appear only on the first part after a pause.
  • Support long extensions. Cantilevered length plus injection pressure equals a bent part and a leaking seat.
Related

Other components in this range

View category

Need this part matched to your press?

Send the machine model and the resin. We confirm geometry, material and surface treatment before quoting.

Nozzle Extensions for Deep Molds Quoted to confirmed specs